• Name :How to reduce the generation of dust when Construction Waste Crusher work?
  • Abstract:

    For Construction Waste Crusher, how can we reduce the number of dust it, how to meet the development of emission standards? Construction Waste Crusher is the ore dressing and stone production in the field of more popular crushing equipment, no two. Dust is Construction Waste Crusher in the work of the more common workflow, the new equipment are equipped with dust removal device, can reduce the dust to the emergence of the earth. In actual production, the dust absorbed by the Construction Waste Crusher is filtered and returned to the belt conveyor by a screw conveyor. According to the reasons for the dust, the user should adopt a reasonable way.

Introduction

In recent years, the whole of North China, and even South China, are haze hailed. Especially in winter, when serious, the sun has become dark red. And the cause of environmental protection is related to the vital interests of the people, is also my two big business, so the development of industry needs to take into account the requirements of environmental performance, can not take the extensive development of the road, the first route of pollution control Unreasonable For Construction Waste Crusher, how can we reduce the number of dust it, how to meet the development of emission standards? The small series of two well-known Construction Waste Crusher manufacturers in Shanghai PE series Construction Waste Crusher, for example, to complete a complete description, hoping to help you on the Construction Waste Crusher in dust emissions have a more comprehensive understanding , The purchase of environmentally friendly requirements of the broken equipment to help.

Application:

Construction Waste Crusher is the ore dressing and stone production in the field of more popular crushing equipment, no two. Its status is unshakable, it has survived for nearly a hundred years of experience and improvement, is already very mature crushing equipment. Size of the concentrator and quarry can see its shadow. It is not only very suitable for the initial broken material, but also very suitable for the second broken material. Which Shanghai World State production of PE series Construction Waste Crusher is the elite of the elite, much users of all ages. Because it is often used as the first crushing equipment, can imagine, its production environment is more difficult, but also more special, often can not do the construction of a closed environment, to prevent the spread of dust to the surrounding. So for a long time, it is in the broken operation, often open air, some unqualified equipment in the broken, accompanied by a lot of dust, big impact on the environment. Therefore, in order to reduce the generation of dust, we have to do its production to effectively control. Dust is Construction Waste Crusher in the work of the more common workflow, the new equipment are equipped with dust removal device, can reduce the dust to the emergence of the earth. We are often able to feel the dust will pollute the working environment and cause air pollution, and thus lead to harm the health of the operator and other personal health, but ignoring the other two phenomena, it will also accelerate the Construction Waste Crusher wear, Shorten its service life. Therefore, the dust removal work of the crusher is very necessary and important.

In the work, in order to Construction Waste Crusher operation of the dust generated by a thorough treatment, we must find out the reasons for the formation of dust, which is more basic ideas. In the production of its operation, the crusher's rotor in the high-speed rotation of the material at the same time, the upper part of the crusher in the upper part of the chute to the tail, forming a high pressure air flow, with the high pressure airflow out part The dust collector sucks away, and the part that is not sucked is taken with a lot of pulverized coal from the lower chute. This is the two main reasons for the formation of dust. In addition, the tail of the chute for the linear, the circulation area is also great, high pressure air flow from here to flow, the formation of dust. This is the basic principle of the emergence and collection of dust in Construction Waste Crushers, so if the improvements are made, the two processes are often optimized to minimize dust and ensure that the equipment itself is not in large amounts of dust. Its pollution of the lubricating parts, etc., resulting in machine wear and reduce the use of equipment time limit.

In the actual production, the dust absorbed by the Construction Waste Crusher is filtered and sent back by the screw conveyor to the belt conveyor. The outlet position is located just below the dust cover, and the pulverized coal is immediately blown away by the high pressure airflow , Sucked away by the suction pipe, resulting in secondary pollution. Moreover, the external dust collector is more dispersed, because the dust pipe is very long and elbow, making the vacuum by the resistance is very large. At the same time as the vacuum, the machine will absorb two more clean air outside.

For the Construction Waste Crusher dust of the various drawbacks, we have to use a reasonable way to solve, only the right way will be helpful to the production. According to the reasons for the dust, the user should adopt a reasonable way. Because the Construction Waste Crusher dust caused by improper consequences, compared to dust and dust on the environmental pollution consequences, there is no more. Therefore, we need to carefully analyze the pros and cons of the measures taken, and strive to do better, ready for production.